Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Jamesburg: What to Know First
We repair and rebuild Olympia Chimney liners in Jamesburg as an independent service provider, not a factory arm. Most Olympia liner jobs here run from a same-week stainless steel replacement to a partial rebuild that takes two or three days depending on how far the damage goes. Prices are honest, quoted before the first tool comes off the truck, and backed by our 90-Day Done Right Promise in writing. If you own an Olympia Chimney system in Jamesburg and the liner is cracked, rusted, or just done its time, call (609) 905-5820 and Wendell or one of his crew will tell you straight whether it needs work now or can wait another season.
This page is for Jamesburg homeowners who want the unvarnished word on Olympia Chimney liner and rebuild work, what it costs, and what actually goes into the job.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia Chimney builds solid products, but every liner lives in a hostile place. Here’s what we actually see in Jamesburg flues, and what we do about it.
- Olympia ArmorFlex liners pitting at the seam welds. The ArmorFlex series is a workhorse, but we regularly find pinhole corrosion where the flexible corrugation meets the welded seam. It starts as a hairline crack and lets flue gas condense behind it. By the time you see staining on the brick, the liner is usually shot. We replace it with a properly sized 316L stainless liner and move on.
- Ventis double-wall chimney sections losing their inner wall. Olympia’s Ventis line handles high heat well, but in Jamesburg winters the freeze-thaw cycle works on the outer casing and creosote works on the inner wall. The inner liner can warp and separate from the insulation pack without ever breaching the outer shell. You won’t see it from the ground. Our camera shows it in five minutes.
- Flexible liner kinked during the original install. This one isn’t Olympia’s fault, but we see it constantly. Somebody forced a flex liner through an offset damper or an old clay tile with a tight bend, and the corrugation collapsed on itself. The flue still draws, weakly. The real cost is the creosote that builds up behind that kink. We pull it, inspection-camera the whole run, and re-line it straight.
- Rusted adapter plates where the liner meets the appliance collar. Olympia connector plates are galvanized steel. In a damp Jamesburg basement or an exterior chase, that plate sweats and rusts through long before the liner above it fails. It’s a $40 part and a one-hour fix, and we replace them whenever we’re already inside the system.
- Clay tile remnants inside the original flue scoring the liner during install. When a liner is pulled through a terra cotta flue, jagged tile edges can gouge the stainless as it goes. We line Jamesburg chimneys with a protective mesh sleeve during the pull and inspect the full length with a camera afterward. The camera footage is yours to keep, and if the liner shows damage from the install, we fix it on our dime.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
You call, we talk. A live person answers, around the clock. We ask about your system, your symptoms, and schedule a time that works. No call center, no voicemail maze.
- 2
The sweep shows up and looks before he touches. Wendell or his crew runs the camera down the flue before any tool does real work. You see the footage on the spot, and you get the plain-English verdict: fix now, watch it, or leave it alone.
- 3
Parts decision made with you in the loop. If the liner needs replacing, we talk you through OEM Olympia versus quality aftermarket like DuraFlex. For most Jamesburg homes, the right 316L liner from a proven American manufacturer does the job for less. If warranty coverage matters more than upfront cost, we price both ways.
- 4
The work gets done right, including the stuff nobody sees. We size the liner correctly instead of forcing whatever’s on the truck, pull it carefully, seal the top plate, and cement the crown if it’s been leaking into the chase. Cleanup comes with a drop cloth and a vacuum, not a shrug.
- 5
We test the draw and show you the finished camera run. The flue gets checked with the appliance running, top to bottom. You get photos or footage of the completed liner.
- 6
You get the 90-Day Done Right Promise in writing. If anything’s not right, one call brings us back. Wendell puts his name on that paper, and he runs into you at the hardware store.
What Olympia Chimney Chimney Liner & Rebuild Costs in Jamesburg
Here’s straight pricing for the Olympia Chimney work we do most in Jamesburg. These are real ranges from actual jobs, not a national average pulled off a chart.
- Stainless steel liner replacement (25-35 ft typical Jamesburg two-story): $2,200-$3,800 depending on diameter, insulation, and access.
- Flexible liner install with new top plate and rain cap: $1,800-$3,200.
- Partial rebuild (top 15-20 courses of brick, new crown, new flue tile at the top): $1,400-$2,800.
- Full chimney rebuild from the roofline up: $4,500-$9,000 depending on height, brick type, and scaffolding access.
- Adapter plate or connector replacement while we’re already there: $40-$90.
What moves the price: roof pitch and chimney height, chase condition, whether the old liner comes out clean or fights us, and whether the brick below the roofline is worth saving. We don’t charge a trip fee inside the county, and the estimate is free. Call (609) 905-5820 and you’ll get a number you can hold us to.
Why Jamesburg Homeowners Call Top Hat Chimney for Olympia Chimney Work
We’ve been working chimneys in central Jersey since 1999, and Wendell Pike has spent more than a few afternoons on roofs near Victory Park. That matters because when you call about an Olympia Chimney liner, the person on the phone actually knows what an ArmorFlex seam looks like when it’s failing. We’re not a franchise that rotated a crew in last spring. We install and service Olympia, DuraFlex, HeatShield, and Gelco, so if your Olympia liner isn’t the real problem, we’ll tell you that too. If it does not need cleaning, I will tell you that too. Every job gets the 90-Day Done Right Promise, every tech is background-checked and shows up in uniform with a real arrival window, and the price you hear on the phone is the price on the invoice.
FAQs
No. Olympia Chimney’s warranty covers defects in their manufactured products, not the labor or the installation. As an independent service provider, we’re careful to keep the system within the manufacturer’s specs so any remaining warranty coverage on other components stays intact. If a warranty claim is worth pursuing, we’ll help you document it.
We can match the size, but not the history. The old liner has been through years of heat and condensate, and a new section of liner joined to a 15-year-old run is a gamble. In nearly every Jamesburg home we see, the full replacement costs less than a patch-and-hope job once labor and the second trip are factored in. We’ll price both and let you decide with the camera footage in front of you.
A straight liner replacement is typically completed in one day, and most parts are on the truck or one supplier run away. A partial rebuild runs two to three days, and a full rebuild from the roofline up usually takes three to five working days depending on weather and scaffold time. We’ll give you a real window and call if it slips.
Depends on the brick, not the brand. If the masonry below the roofline is solid and the flue is straight enough to accept a properly sized liner, a liner replacement is the right call and costs thousands less. If the brick is spalling, the mortar is gone, or the crown has let water run down the inside for years, you rebuild. The camera tells us which one you’re looking at, and we don’t recommend a rebuild without footage you can see for yourself. Call (609) 905-5820 and we’ll put eyes on it.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Jamesburg and nearby areas.